BMW SUSTAINABILITY

VEHICLES, MATERIALS & PRODUCTION.

INTRO

BMW ON THE WAY TO A MORE SUSTAINABLE FUTURE.

Sustainability in production, in equipment and in consumption. Our vehicles and their production show how we view our responsibility as a company in these areas. And how we assume this responsibility. Find out more about what we are doing – and all the things we are planning.

BMW Sustainability 2023 electrified mobility

BMW ELECTROMOBILITY

> 1 M

BMW Electromobility.

The BMW Group has already put 1,000,000 electrified vehicles onto the road by 2022.

BMW Sustainability 2023 less energy used

LESS ENERGY USED

6.3 M MWh

Less energy used.

The total energy consumption of the BMW Group in 2022 was 6.3 million MWh. That is 2.8% less energy consumed than the year before. Thanks to energy-saving measures, like switching over to LED lighting in 16 plants.

BMW Sustainability 2023 reduced CO2 emissions

REDUCED EMISSIONS

0.32 t

Reduced emissions.

Just 0.32 t CO2 emissions were created in 2022 in the production of a BMW. Compared with the emissions from resource procurement and those that occur during use this is a small share. But it has a positive impact on the overall CO2 footprint of a vehicle.

RECYCLING RATHER THAN DISPOSAL.

BMW Sustainability 2023 recycled materials fishing nets

Fishing nets.

The floor panels in the BMW iX as well as the new BMW X1 and BMW i5 are made from a plastic thread derived from disused fishing nets, floor coverings and scrap from plastics production as its starting materials. The panelling parts used on the inside and outside result in 25% fewer CO2 emissions than conventionally produced components.

BMW Sustainability 2023 recycled materials recycling plastic

Recycled plastic.

Recycled materials are used in many components of a BMW. The luggage compartment panelling in the BMW i5, for example, comprises up to 60% recycled plastic. In the guides for the bumpers, the substructure of the door panels, the windscreen panel cover and the frame of the front cowling of the BMW iX, this figure is even as high as 100%.

BMW Sustainability 2023 recycled materials cactus fibers

Cactus fibres.

In cooperation with start-up companies, the BMW Group is developing innovative bio-based surfaces. The newly developed Deserttex™, for instance, is made up of pulverised cactus fibres and a bio-based polyurethane matrix. In this way, the avoidance of animal-based products can be combined with a reduction in CO2.

FAQ

FREQUENTLY ASKED QUESTIONS ON VEHICLES & MATERIALS.

PRODUCTION & SUPPLY CHAIN

GLOBAL MEASURES FOR MORE SUSTAINABILITY.

A focus on sustainability and customer proximity is what distinguishes the BMW Group. That's why we prefer to produce locally around the world - in compliance with uniform quality and safety standards.

WIND, SUN AND INNOVATIVE TECHNOLOGIES.

BMW Sustainability 2023 wind energy

Wind energy.

The four wind turbines on the grounds of the BMW Group plant in Leipzig are each able to achieve a nominal output of 2.5 MW. They cover about one eighth of the electricity required in the plant. An intelligent storage farm in which up to 700 BMW i3 batteries are linked in a network stores surplus energy from the four wind turbines in times of surplus supply and feeds the electricity back into the grid when there is insufficient wind.

BMW Sustainability 2023 solar energy

Solar energy.

The solar power plant in the BMW Brilliance Automotive Ltd. Plant Dadong (Shenyang) is able to produce more than 21 MWh of renewable energy in 2022. To this end, its area has been increased by 110,000 m2 – equivalent to roughly 15 football pitches – to a total of 290,000 m2 during the course of the Shenyang site expansion.

BMW TAKES RESPONSIBILITY.

Sustainability covers many aspects at BMW: from the inspection of our supply chains through to support for external programmes, we do everything to keep our ecological footprint as small as possible.

FAQ

FREQUENTLY ASKED QUESTIONS ON PRODUCTION & SUPPLY CHAIN.

Official data for fuel consumption, CO2 emissions, power consumption and electric range was determined in accordance with the prescribed measuring procedure and corresponds to European Regulation (EC) 715/2007 in the applicable version. For ranges, data determined as per WLTP takes into account any optional equipment (available on the German market in this case). For vehicles that have been newly type approved since 1 January 2021, only the official data according to WLTP exists. In addition, NEDC values are deleted from the certificates of conformity as of 1 January 2023 by EC regulation 2022/195. For more information about NEDC and WLTP measuring procedures visit www.bmw.com/wltp